We have been tracking reported issues where externally connected USB devices and/or internal USB devices within the TBT3-UDZ docking station (Ethernet, audio, and card reader) may not be detected after waking the system from sleep or after rebooting on some macOS systems (typically only with M1 based Macs).
Some users may also experience one or both displays attached to the dock not waking from a low power sleep state as well (can affect both M1 and Intel based Macs).
If running macOS Catalina 10.15.x or macOS Big Sur (prior to 11.3) and are experiencing issues with the Ethernet only, please see: https://kb.plugable.com/776031
To begin troubleshooting USB device and/or display issues:
If using an Intel based Mac we recommend the following steps:
- Unplug the dock from the Mac and unplug power from the dock. Please leave the dock disconnected until the final step.
- Perform an SMC reset: https://support.apple.com/en-us/HT201295
- Perform an NVRAM/PRAM reset: https://support.apple.com/en-us/HT204063
- After logging back in, wait about 30-60 seconds, then plug power into the dock first and plug the dock into the Mac next (using the provided Thunderbolt 3 cable the dock shipped with) and see if the behavior has improved.
If using an M1 based Mac we recommend the following steps:
- Unplug the dock from the Mac and unplug power from the dock. Please leave the dock disconnected until the final step.
- Fully shutdown the Mac. (On your Mac, click the "Apple" menu and select "Shut Down")
- After the Mac has shutdown, wait for 60-90 seconds, then turn the Mac back on.
- After logging back in, wait about 30-60 seconds, then plug power into the dock first and plug the dock into the Mac next (using the provided Thunderbolt 3 cable the dock shipped with) and see if the behavior has improved.
If these initial troubleshooting steps do not help, please contact us at support@plugable.com and we'll be happy to assist you.